TKC80's on a DL1000 V Strom?

dubber68 · Post by **dubber68** » Sat Mar 15, 2014 6:19 pm

I ran heidenau K60 on my Strom and they were really good on the road and for light trail use. They give good mileage as well. I fitted the TRE mod on mine and it did smooth up the power delivery. Also removed the electronically controlled butterfly from the venturi to release full power in the lower gears. A fork brace fitted to remove alot of the vagueness in the front end.

Sent from my GT-I9100 using Tapatalk 2

Mosel Bikes · Post by **Mosel Bikes** » Sat Mar 15, 2014 6:30 pm

Thanks Dubber, useful information and I'll take a look at those K60's.

macvisual · Post by **macvisual** » Sat Mar 15, 2014 6:37 pm

Hi dubber68;

Where's the best place to source a "fork brace" please ? Any info would be appreciated. Hard to fit on the DL thou?

Thanks;
Pete

dubber68 · Post by **dubber68** » Sat Mar 15, 2014 6:48 pm

If you go into stromtrooper there should be a shortcut but I haven't been on there for a while. The brace was easy to fit.

Sent from my GT-I9100 using Tapatalk 2

dubber68 · Post by **dubber68** » Sat Mar 15, 2014 7:00 pm

http://www.v-strom.co.uk/phpBB3/viewtop ... ace#p61405

A link to stromtrooper.

dubber68 · Post by **dubber68** » Sat Mar 15, 2014 7:01 pm

A cheaper one on Ebay

http://www.ebay.co.uk/itm/Fork-Brace-su ... 0935313452

TKC80's on a DL1000 V Strom?

Re: TKC80's on a DL1000 V Strom?

Re: TKC80's on a DL1000 V Strom?

Re: TKC80's on a DL1000 V Strom?

Re: TKC80's on a DL1000 V Strom?

Re: TKC80's on a DL1000 V Strom?

Re: TKC80's on a DL1000 V Strom?