Hello
On the NC750X you can set your message to show on the dash at start up and end.
I have done this, BUT, unfortunately have entered an extra letter at the end. Instead of James, it says Jamess
I cannot find any instructions in the handbook on how to erase the extra letter, or reset everything to start again.
Anyone know how you do this.
NC750X start up and end message on dash
-
- Posts: 3532
- Joined: Tue May 09, 2017 9:03 pm
- Has thanked: 1424 times
- Been thanked: 1674 times
Re: NC750X start up and end message on dash
Crikey...on my bikes I just put the key in the ignition, turn it, then press the starter button.
Actually, that's not true for all of them. I just set the choke and kick the Gas Gas over.
Actually, that's not true for all of them. I just set the choke and kick the Gas Gas over.
Re: NC750X start up and end message on dash
Ha ha, a proper first world problem, I'm lucky if the dash on any of my bikes shows a fuel gauge! Have a look on the excellent NC owners forum, I'm sure someone there will be able to help:
http://www.nc700.co.uk
http://www.nc700.co.uk