Adventure Bike Rider Forum

Im currently emptying a factory unit that has a "proper" maintenance shop with loads of heavy duty tools, spares, bearings etc as well as lifting strops, shackles, chains, lifting gear.
There are a couple of lathes, pedestal drills, surface grinders.
Also tool boxes, micrometers, calipers, mechanical hacksaw, sand blaster, endless fire extinguishers, ladders, wall clocks, lockers etc etc
There is a copious amount of grease cartridges, oil, spray cans of various lubrication solutions
Finally there are literally dozens of electrical motors with and without gearboxes
anyone interested please drop me a pm as I will be uplifting as much as possible over the next 3 weeks and then weighing in the remainder.
its located in Bradford area but I can ship stuff anywhere at a reasonable rate
Cheers

Are the lathes etc 3 phase?

if you can PM me a list of what you have, I have a friend who loves to buy this type of stuff.

i may be interested in a few bits, tool boxes etc. if you can let me know what there is. no shipping required as i'm located in Bradford

lmg wrote:if you can PM me a list of what you have, I have a friend who loves to buy this type of stuff.

+1
The more unusual stuff generally interests me

pm sent

hi bud,

please pm a list and what kind of prices and where you are located

steve

HarvonAB wrote:Im currently emptying a factory unit that has a "proper" maintenance shop with loads of heavy duty tools, spares, bearings etc as well as lifting strops, shackles, chains, lifting gear.
There are a couple of lathes, pedestal drills, surface grinders.
Also tool boxes, micrometers, calipers, mechanical hacksaw, sand blaster, endless fire extinguishers, ladders, wall clocks, lockers etc etc
There is a copious amount of grease cartridges, oil, spray cans of various lubrication solutions
Finally there are literally dozens of electrical motors with and without gearboxes
anyone interested please drop me a pm as I will be uplifting as much as possible over the next 3 weeks and then weighing in the remainder.
its located in Bradford area but I can ship stuff anywhere at a reasonable rate
Cheers

sorry just saw bradford, are you open for viewing

Have responded to pm's
more info and pix next week
.......as far as unusual goes.....what are you after....there are bearing pullers.....hydraulic press.....unf/unc taps and die sets.....AF and Whitworth spanners....etc
also there are two fork lift trucks and numerous pallet trucks etc
gallons of gear oil but unusually light weight...68.....
im doing a full inventory next week......the reason for the post is "what" I put on the inventory.....ie full set of Whitworth sockets....or "scrapped mechanical tools"

Once you've done a complete inventory I might be in a position to buy any large size BSF taps you've got. If there are any taps that are BSF (55 degree) form but special pitches as in 6 or 8 tpi in large sizes we'll definitely be able to take them off your hands at a mutually acceptable price.

Post something when you've had a good look through what's there and I can probably pop over to have a chat and a look through what you've got because that kind of kit is getting rarer by the month and the company I work for are always willing to pay decent money for it. Failing that I can probably point you at someone who'll give you a very good price for everything.