A photo you took, today

[Hugh]

Greetings,

Riding along New Lane, Bradwell, today, a very low flying buzzard shot over the top of my lid to land on a barn, so chasing off two crows.

New Lane.jpg (139.28 KiB) Viewed 1428 times

TTFN

Hugh.

[soho]

I was in Bridport last Friday for about 5 minutes before heading on, and didn't get time to even see the water. Back today after a round trip,
so 50p on the town car park gave me time to have a look.This was West Bay- spectacular I thought ?

thumbnail_IMG_3685.jpg (143.79 KiB) Viewed 1364 times

thumbnail_IMG_3687.jpg (97.79 KiB) Viewed 1364 times

[boboneleg]

Passed the BA Jumbo's again today...........

IMG_7900.JPEG (96.67 KiB) Viewed 1344 times

[Richard Simpson Mark II]

Strange to think that those cost millions and are now just worth their scrap weight.

[Asgard]

Over 100 million each, I have to say though despite being an aviation nut and a pilot, and terrible though the loss of jobs is...its a big plus for the planet and I hope levels of air travel never reach the levels they were at before all this.
A large proportion of which perhaps surprisingly was business trips most of which are for meetings that could quite easily be held remotely and face to face stuff left for things like final agreements.

If your loaded and want a piece of a 747 for a christmas prezzie, how about: https://www.businesstraveller.com/busin ... ired-747s/

[bikenav]

only ever done one return trip on em kinda sad to see them parked there, even though not knowing the facts of the envioromental impact I am sure it is a very good for the planet. I used to do a little co-driving for a guy used to drive these things carrying freight for a living, a bit of a racer he was, said occasionally he would preset the take off power higher than necessary for the weight and what a difference it would make.

[Billy Bananahead]

When needs must. Fingers crossed for the cable tied piston ring clamps to work. I hate this bit of a 4 cylinder rebuild.

WP_20201204_11_10_57_Pro_LI[1].jpg (134.09 KiB) Viewed 1191 times

[mark vb]

When needs must. Fingers crossed for the cable tied piston ring clamps to work. I hate this bit of a 4 cylinder rebuild.
WP_20201204_11_10_57_Pro_LI[1].jpg

Let us know if the ties work without too much of a fiddle - I ask, as I have barrels to refit on a 750-4 motor and need to buy some more ring compressors.... or ties, maybe

[Billy Bananahead]

When needs must. Fingers crossed for the cable tied piston ring clamps to work. I hate this bit of a 4 cylinder rebuild.
WP_20201204_11_10_57_Pro_LI[1].jpg

Let us know if the ties work without too much of a fiddle - I ask, as I have barrels to refit on a 750-4 motor and need to buy some more ring compressors.... or ties, maybe

Sure. I just drilled two holes in each of the next size down ring clamps that are in the two kits i have and then used some thin metal strips to fill the gap. I really hate this bit.

[soho]

On the floor is the snake that was living inside my Blade. Some people would call it a Spy Ball alarm system. A bit of open heart surgery (3 hrs), and there we have it........Now I can start the bike after both remotes having given up !

DSC_0072.jpg (178.96 KiB) Viewed 1171 times