Page 5 of 7

Re: UK CRF500L #2 Build Thread

Posted: Tue Jan 02, 2018 8:13 pm
by Archie
If you haven't used Seat Concepts before they would be worth considering. I've used them on 2 different bikes and found them to be really good and much more comfortable than anything the japs have produced.
Link:
https://seat-concepts.myshopify.com/pro ... 16-crf250l
Cheers

Re: UK CRF500L #2 Build Thread

Posted: Tue Jan 02, 2018 8:15 pm
by tuftywhite
Your MOT station should tell you how much it weighs.

They have to weigh the bike to work out whether your brakes are good enough, as I understand it.

Re: UK CRF500L #2 Build Thread

Posted: Tue Jan 02, 2018 9:07 pm
by jkay
flipflopdog wrote: Tue Jan 02, 2018 6:25 pm Hey Archie, not found a local weigh bridge yet but likelihood is around 150/160KG's what with the twin cans n all....
Try any of your local scrapyards that's where we weigh motorhomes for work
Brilliant bike by the way

Re: UK CRF500L #2 Build Thread

Posted: Tue Jan 02, 2018 9:26 pm
by dave h
stand it on two sets of bathroom scales ,you get the front/rear bias also,

nice bike,

dave.

Re: UK CRF500L #2 Build Thread

Posted: Wed Jan 03, 2018 8:46 am
by dodursley
you do not need 2 scales, just put the scales under the front and then under the back and adding the measurements,
It is worth putting a short piece of plank under the wheel to distribute the load across the scales, it will only be a Kg so within the accuracy of the measurements and it will reduce the possibility of bending the top (from experiance!)

Re: UK CRF500L #2 Build Thread

Posted: Wed Jan 03, 2018 9:05 am
by HedgeHopper
Quick note on weighing, if you are going to swap one scale from front to back, to be accurate the bike needs to remain level so you put a packing piece under the opposite wheel that is the same height as the scale, if you dont do this your result will be under the actual weight.

if it's a very low scale and the bike is long it makes little difference but if the scale is quite high and the bike quite short it can be out a couple pounds if you don't level

Re: UK CRF500L #2 Build Thread

Posted: Wed Jan 03, 2018 12:39 pm
by Cone
I always wondered whether the large recycling facilities that have weigh bridges would let people use them if you talked nicely to the chaps there :? I thought about chatting to them when i had a Westfield but never got around to it!

Re: UK CRF500L #2 Build Thread

Posted: Wed Jan 03, 2018 5:48 pm
by Hoggyf
The public tip where I take all the waste from work has a big weigh bridge and as soon as you drive on there's a display on the wall, so just ride up and stop on the scales, then go in and ask what time they close ;)

Re: UK CRF500L #2 Build Thread

Posted: Sat Mar 03, 2018 6:40 pm
by flipflopdog
Construction update: rear auxiliary fuel tank being crafted while I’m away with work and a Chinese Acerbis 12.5 litre tank ordered, pics galore when home. Should give me around 20/22 litres overall .. screen from Baja performance on order also, where does it stop...?!!!


Sent from my iPhone using Tapatalk

Re: UK CRF500L #2 Build Thread

Posted: Thu Mar 15, 2018 2:56 pm
by flipflopdog
IMG_E0470.JPG
IMG_E0470.JPG (59.21 KiB) Viewed 3874 times
IMG_0468.JPG
IMG_0468.JPG (65.46 KiB) Viewed 3874 times