Spotted these on Ebay. Stainless buckles + British webbing....
http://www.ebay.co.uk/itm/-/232319653656?
webbing straps
-
- Posts: 715
- Joined: Tue May 10, 2011 8:31 pm
- Has thanked: 13 times
- Been thanked: 110 times
Re: webbing straps
A few years ago I found reels of webbing and camlocks on ebay and made up my own straps, just needed someone with a decent sowing machine/strong needles to make the loops, made straps to whatever length I needed. still using them for camping trips, securing push bike onto cycle carrier and general tying down. Much cheaper than your branded straps and just as good.
Re: webbing straps
The very nice people at Manchester BMW gave me 2 for free the new bikes come in the packing cases to hold them down I'd go and ask your local bike dealer .
Ta steve
Ta steve
-
- Posts: 715
- Joined: Tue May 10, 2011 8:31 pm
- Has thanked: 13 times
- Been thanked: 110 times
-
- Posts: 715
- Joined: Tue May 10, 2011 8:31 pm
- Has thanked: 13 times
- Been thanked: 110 times
Re: webbing straps
QuickNick wrote:A few years ago I found reels of webbing and camlocks on ebay and made up my own straps, just needed someone with a decent sowing machine/strong needles to make the loops, made straps to whatever length I needed. still using them for camping trips, securing push bike onto cycle carrier and general tying down. Much cheaper than your branded straps and just as good.
Are your buckles made from 316 stainless steel and have been stitched expertly at a cost to the camlock buckles..?? Just a thought mate.....
Re: webbing straps
Sorry Flipflopdog but I couldn't tell what the camlocks are made from but there's no sign of corrosion or wear on them and the stitching was done by my daughter with heavy duty cotton and I've not had a failure yet.As I said previously made them different lengths so I don't need to be tying off long lengths of spare strap either.
-
- Posts: 715
- Joined: Tue May 10, 2011 8:31 pm
- Has thanked: 13 times
- Been thanked: 110 times
Re: webbing straps
I'm an advocate of the 'don't ask don't get' technique for sure. Contact me on [email protected] and i'll sort you outWill wrote:Hi is there a discount for ABR'S