Serious question Al.
Are you happy with the bike and the way Honda have dealt with any issues and would you still buy it if you could turn the clock back?
I'm only asking because much as I loved riding my Multistrada it just wore me down to the point where I got rid earlier than I intended and I'm much happier with the 1190 KTM.
The Honda Africa twin 1000 , warts and all.
-
- Posts: 11334
- Joined: Thu Dec 09, 2010 8:24 pm
- Has thanked: 158 times
- Been thanked: 167 times
Re: The Honda Africa twin 1000 , warts and all.
hi andy ,this is the first bike Iv purchased without seeing in the flesh, only from pictures . Possibly I'm daft ,only time will tell. Iv had a few issues with the bike. To be fair my local Honda dealer have been first class, the only fly in the ointment have been Honda GB ,they are a joke of a company to deal with. I love the bike even with its faults, I only hope the sort out problems before it becomes a litacation issue Al (thumbs)AndyB wrote:Serious question Al.
Are you happy with the bike and the way Honda have dealt with any issues and would you still buy it if you could turn the clock back?
I'm only asking because much as I loved riding my Multistrada it just wore me down to the point where I got rid earlier than I intended and I'm much happier with the 1190 KTM.
moto al
Re: The Honda Africa twin 1000 , warts and all.
I have gunned it over the Ruttland rig last sunday , 4'th gear flat out it was fun while it lasted , first the number plate came off and then the front tyre " lost pressure " :pinch: did not get home till 3am , i would recommend heavy duty tubes and slime if you are planning to jump it and land it on some big rocks :silly:sohoeasy wrote:Mr D Knight last Saturday in Wales, Impressively gunned this bike around a Moto X track (thumbs)
-
- Posts: 3402
- Joined: Thu Apr 21, 2011 1:30 pm
- Been thanked: 1 time
Re: The Honda Africa twin 1000 , warts and all.
That's a build-up of metalic dust from the brake pads. If you don't wipe it off, it digs into the spokes and makes them go rusty. My KTM 950 looks just the same.
Some heavy trucks have polished, unlacquered forged aluminium wheels. When disc brakes first appeared on trucks, the wheels suffered from pitting which was down to hot metalic particles being abraded off the brakes and sticking to the wheels.
Alcoa now do a 'Durabrite' coating on their truck wheels.
Some heavy trucks have polished, unlacquered forged aluminium wheels. When disc brakes first appeared on trucks, the wheels suffered from pitting which was down to hot metalic particles being abraded off the brakes and sticking to the wheels.
Alcoa now do a 'Durabrite' coating on their truck wheels.
Re: The Honda Africa twin 1000 , warts and all.
As it`s down to WEIR and tear I presume it has been ridden through water? :side:moto al wrote:Hi this was on the Africa twin forum, the bike has covered 900kms , Honda Australia said its down to weir and tear :whistle:
-
- Posts: 679
- Joined: Mon Jun 09, 2014 5:53 pm
Re: The Honda Africa twin 1000 , warts and all.
on that subject, i jumped my cub into a big rock pile a few weeks back, followed a gravel road, up over a crest (in the air!) and SMASH!, landed on a pile of boulders and a dead end of the gravel road, lucky i wasnt on the gs, would have destoyed the wheel i think....ZX Raziel wrote:I have gunned it over the Ruttland rig last sunday , 4'th gear flat out it was fun while it lasted , first the number plate came off and then the front tyre " lost pressure " :pinch: did not get home till 3am , i would recommend heavy duty tubes and slime if you are planning to jump it and land it on some big rocks :silly:sohoeasy wrote:Mr D Knight last Saturday in Wales, Impressively gunned this bike around a Moto X track (thumbs)
-
- Posts: 11334
- Joined: Thu Dec 09, 2010 8:24 pm
- Has thanked: 158 times
- Been thanked: 167 times
Re: The Honda Africa twin 1000 , warts and all.
Today I fitted a givi quick release tankbag , has anyone use one ,and any comments . I also fitted a big foot ,with the help of Franco ,unfortunately you can't use a paddock stand due to the design of the swinging arm.
moto al
Re: The Honda Africa twin 1000 , warts and all.
Mine looked like that after the first ride from the dealers ( roughly 20 miles ) , washed it and the next day I have noticed the damaged plating on one side of the spokes , all I know is that some bikes suffer from the same issue , some don't , stainless steel spokes don't suffer from cheap plating issues .moto al wrote:Hi this was on the Africa twin forum, the bike has covered 900kms , Honda Australia said its down to weir and tear :whistle:
-
- Posts: 11334
- Joined: Thu Dec 09, 2010 8:24 pm
- Has thanked: 158 times
- Been thanked: 167 times
Re: The Honda Africa twin 1000 , warts and all.
Iv been told Honda know theirs an issue , and with 2 year warranty I'm not really pushing for new wheels at present . Cheers Al . And it's still a great bike.ZX Raziel wrote:Mine looked like that after the first ride from the dealers ( roughly 20 miles ) , washed it and the next day I have noticed the damaged plating on one side of the spokes , all I know is that some bikes suffer from the same issue , some don't , stainless steel spokes don't suffer from cheap plating issues .moto al wrote:Hi this was on the Africa twin forum, the bike has covered 900kms , Honda Australia said its down to weir and tear :whistle:
moto al