Use Harpic to clean exhaust

If you know how to do something, share it with other members. i.e How to fix a puncture...How to ship a bike to Alaska etc. The post with the most 'Thank You' votes in a month wins an ABR Hoodie.
nortyrascal
Posts: 76
Joined: Tue Nov 03, 2015 7:29 pm

Re: Use Harpic to clean exhaust

Post by nortyrascal » Tue Apr 04, 2017 11:41 am

I cleaned my pipes at the weekend with Harpic and I was very impressed. It contains 9% Hydrochloric acid so I put a black bin liner behind the headers and removed the belly pan as the stuff will damage engine cases and paintwork at that concentration.

As soon as the stuff goes on you can see it reacting with the rust on the pipes. I left it for a couple of minutes and then agitated it with a green scotchbrite. Then I rinsed it off. The whole process took about half an hour.

Here are a couple of before and after pics. The before was taken about 3 months ago so if anything the pipes were a little worse than the pic. The after pics shows the result with Harpic and scotchbrite. They still need finishing off with some Solvol but I think it's good result.

I won't be going back to Solvol and wire wool method. Just make sure you mask the bike off so you don't get any splashes on the rest of the bike.

Regards
norty

photo1.jpg
photo1.jpg (59.97 KiB) Viewed 7663 times
pipes.jpg
pipes.jpg (34.99 KiB) Viewed 7663 times

Adventure Bike Rider New Issue Out Now
User avatar
Boggs
Posts: 1254
Joined: Thu Jan 26, 2012 5:37 am
Has thanked: 89 times
Been thanked: 97 times

Re: Use Harpic to clean exhaust

Post by Boggs » Tue Apr 04, 2017 12:03 pm

Don't use toilet duck,it just left me with a huge bill.

:whistle:

Dirk
Posts: 182
Joined: Sun May 24, 2015 7:34 am

Re: Use Harpic to clean exhaust

Post by Dirk » Tue Apr 04, 2017 7:04 pm

:laugh:

TomBoyNI
Posts: 1388
Joined: Thu Feb 07, 2013 8:23 pm
Location: Northern Ireland
Has thanked: 31 times
Been thanked: 38 times

Re: Use Harpic to clean exhaust

Post by TomBoyNI » Thu Apr 06, 2017 1:38 am

I just watched this guy do the exact same thing. I wouldn't be doing it though. :ohmy:
Boo :-p

http://tbni.blog
Motorcycling | Technology | Photography

uturntony
Posts: 135
Joined: Mon May 19, 2014 11:16 am
Has thanked: 6 times
Been thanked: 7 times

Re: Use Harpic to clean exhaust

Post by uturntony » Thu Jun 29, 2017 9:54 pm

rodyorkabr wrote:There's a product called "bar keepers friend"- it's about £4.00 & this works well in removing oxidisation safely.
It does and does it very well (thumbs)

Gedge
Posts: 1576
Joined: Wed Jan 23, 2013 9:19 pm
Been thanked: 1 time

Re: Use Harpic to clean exhaust

Post by Gedge » Thu Jun 29, 2017 10:24 pm

To restore stainless pipes without scrubbing or scouring use Optiglanz..works by chemical reaction..amazing stuff
OptiGlanz Stainless Steel Cleaner (Removes Exhaust Pipe Bluing) - 250ml Spray Bottle

ollydog
Posts: 1813
Joined: Thu Mar 17, 2016 11:34 am
Has thanked: 56 times
Been thanked: 16 times

Re: Use Harpic to clean exhaust

Post by ollydog » Fri Jun 30, 2017 6:38 am

placky2 wrote:cillit bang is bloody good on alloy,despite the knob that does the ads! (thumbs)
who our barry :laugh: :laugh:

steve

User avatar
WIBO
Posts: 1580
Joined: Sat Sep 22, 2012 3:37 pm
Location: French Pyrénées
Has thanked: 562 times
Been thanked: 628 times

Re: Use Harpic to clean exhaust

Post by WIBO » Fri Jun 30, 2017 7:18 am

Boggs wrote:Don't use toilet duck,it just left me with a huge bill.

:whistle:


FFS


:)
Will It Buff Out?









The Suit:What would you consider to be your greatest weakness?

Me: Honesty.

The Suit: Honesty? I don't think honesty could be construed as a weakness.

Me: I don't give a f**k what you think.

User avatar
Mikekitts81
Posts: 570
Joined: Sun Oct 16, 2016 10:13 am
Location: North west
Has thanked: 8 times
Been thanked: 54 times

Re: Use Harpic to clean exhaust

Post by Mikekitts81 » Wed Jun 05, 2019 9:22 pm

20190605_144907.jpg
20190605_144907.jpg (116.2 KiB) Viewed 5811 times
20190605_144905.jpg
20190605_144905.jpg (130.75 KiB) Viewed 5811 times
worls a treat just make sure you wash all the harpic 10 plus off as its hydrocolic acid so it will still keep eating into the metal aslong as its on toothbrush and abwipe and then anhose down is fine heres my results from a rusty exhasut that hadnt been tpuched in iver a year
20190605_153248.jpg
20190605_153248.jpg (181.66 KiB) Viewed 5811 times
All things built not bought . The only way is adventure .

Dansin
Posts: 133
Joined: Mon Aug 23, 2010 6:56 pm
Has thanked: 6 times
Been thanked: 58 times

Re: Use Harpic to clean exhaust

Post by Dansin » Wed Jun 05, 2019 10:03 pm

My 690 header before (broken) and after (welded) harpic max 10 treatment. Pretty much effortless considering the state of it.

Image

Image

Post Reply

Return to “HOW TO..........”

Who is online

Users browsing this forum: No registered users and 3 guests