How to Epoxy Resin Garage Floor
Posted: Sat Apr 02, 2016 9:37 pm
I asked on here a few months ago but no information regarding doing it, we just finished doing our garage floor with the advice of a industrial coating expert for best results
Here is what you need
1-liquid degreaser
2- hydrochloric acid
3-water via garden hose
4-epoxy resin paint (comes in 2 parts) x 2 as one first coat and 2nd coat
5-Hard brush
6-rollers /brushes/paint scrapper
7-tape
1-First we washed the garage floors down with water and washing up liquid and scrapped crap of the floor
2-we then washed the garage floor down with liquid degreaser and hard brushed it in cleaning as best we can patches/stains on the floor
3- wash down with water fully
4-tape edge where resin will be applied to/stop
5- while floor is still wet apply hydrochloric acid (2 parts water 1 acid) floor should bubble and hard brush in for acid etching, leave for 30 minutes but dont let it dry into the floor
6-wash down floor fully with water and hard brush
7-mix epoxy resin with hardener and wait 30 minutes, start to apply to edges first and roller main areas after. epoxy has a 3 hour cure time so all the tin must be used
8-allow to dry for 24-36 hours
9-Apply second coat but this time running the roller in one direction as best can
Happy with results (thumbs)
Before we started, dust all over floor and dirt After we washed and degreased as best we can (walls painted before we started floor)
We applied edge tape before we applied the hydrochloric acid just to be safe for kneeling on floor even after we washed it down Applied acid washing down First coat Second coat
Here is what you need
1-liquid degreaser
2- hydrochloric acid
3-water via garden hose
4-epoxy resin paint (comes in 2 parts) x 2 as one first coat and 2nd coat
5-Hard brush
6-rollers /brushes/paint scrapper
7-tape
1-First we washed the garage floors down with water and washing up liquid and scrapped crap of the floor
2-we then washed the garage floor down with liquid degreaser and hard brushed it in cleaning as best we can patches/stains on the floor
3- wash down with water fully
4-tape edge where resin will be applied to/stop
5- while floor is still wet apply hydrochloric acid (2 parts water 1 acid) floor should bubble and hard brush in for acid etching, leave for 30 minutes but dont let it dry into the floor
6-wash down floor fully with water and hard brush
7-mix epoxy resin with hardener and wait 30 minutes, start to apply to edges first and roller main areas after. epoxy has a 3 hour cure time so all the tin must be used
8-allow to dry for 24-36 hours
9-Apply second coat but this time running the roller in one direction as best can
Happy with results (thumbs)
Before we started, dust all over floor and dirt After we washed and degreased as best we can (walls painted before we started floor)
We applied edge tape before we applied the hydrochloric acid just to be safe for kneeling on floor even after we washed it down Applied acid washing down First coat Second coat