I am selling these beautiful Gore-Tex gloves made by Revit.
120 Pounds Inc P&P
07737 223314
DETAILS
The Dominator GTX gloves have been developed for around-the-world riding. They are ready for all weather types you may encounter due to the GORE-TEX® gloves with Gore grip technology that will make sure your hands stay warmer when it's cold and drier when you perspire. The outer shell is made from various leather types all chosen on the levels of safety and comfort they provide. Besides the hard shell protectors on the thumb, fingers and palm these gloves are equipped with dual comp protectors that have been perforated to allow airflow to enter the gloves, keeping your hands cool and comfortable.
ERGONOMIC FEATURES
ADJUSTABILITY
Wrist and cuff adjustment system
This adjustment system allows for a perfect tailored fit making sure the gloves stay in place and fits like a second skin. The adjustment strap starts at the pinky-side of the glove and goes all the way around the backhand and the wrist.
VENTILATION
Ventilated dual comp protector
The dual-comp protector consists of a 3D, pre-shaped honeycomb structure of TPU material, topped by an aluminum high-impact shield, for ultimate sliding. This lightweight hard part increases the level of protection significantly, without adding the considerable weight of traditional plastic hard parts. The dual comp protectors have been perforated to allow airflow to enter the gloves keeping your hands cool and comfortable.
FEATURES
Elastic
Outside stitching
The PWR | yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands.
Short cuff
Stretch lips
FIT
Tour fit
PROTECTION FEATURES
OUTER SHELL
Goatskin drum dyed with WR finish
Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide. Goatskin with a WR finish has undergone a process that makes it water-repellent and soil-resistant. The WR coating is bonded to the material at the molecular level, enhancing the material’s natural water-repellence and soil-resistance, without altering how the fabric looks, feels, or breathes.
Pittards WR100X Hairsheep Diamond
Pittards WR100X leather is known for its natural waterproofing and perspiration resistance - plus it’s quick to dry yet famous for retaining its soft pliability and comfort. Made from the finest hairsheep leather this thin, tough material has a natural diamond pattern and delivers a superb grip.
WATERPROOFING & BREATHABILITY
GORE-TEX gloves + Gore grip technology
GORE-TEX gloves liners are durably waterproof, windproof, and highly breathable. The Gore grip technology uses an innovative layer construction by which they provide better dexterity and tactility for optimum performance.
PROTECTION
PU injected finger knuckles
REVIT! gloves feature protection patches on the fingers and knuckles, made of a hard PU protective compound, to keep your hands as safe as possible in the event of an impact.
PWR | yarn
PWR|yarn is a 100% nylon thread with a unique internal bonding, which imparts excellent durability, high tensile and breaking strength, and ultimate abrasion resistance. Its strength comes from its unique structure, as a 3-wired yarn with an extra 4th wire spun into it. This 4th wire is heated to bond with the other 3 threads, so it will never unravel or split open. Seams with PWR|yarn hold under even the most extreme stress, and are perfect for outer seams on gloves and garments.
TPU hard shell palm slider
Palm slider made of a durable and high abrasion resistant TPU material at the palm side of the glove. The palm slider makes sure that the glove slides in case the palm of the hand comes in contact with the asphalt. The abrasion resistance of gloves equipped with these sliders is greatly increased, thus reducing the risk of injury significantly.
TPU hard-shell thumb protector
Thermoplastic Urethane (TPU) is a highly durable synthetic material, used in many REVIT! products for protection against impact and to optimize sliding.
Ventilated dual comp protector
The dual-comp protector consists of a 3D, pre-shaped honeycomb structure of TPU material, topped by an aluminum high-impact shield, for ultimate sliding. This lightweight hard part increases the level of protection significantly, without adding the considerable weight of traditional plastic hard parts. The dual comp protectors have been perforated to allow airflow to enter the gloves keeping your hands cool and comfortable.
Revit Dominator GTX gloves. Brand New / Unworn Size Large
-
- Posts: 29
- Joined: Wed Sep 25, 2019 6:00 am
- Location: Bury, Lancashire, UK
- Been thanked: 1 time
Revit Dominator GTX gloves. Brand New / Unworn Size Large
- Attachments
-
- 853A54D6-7C65-4FF7-91E7-AC723D63EAA4.jpeg (188.76 KiB) Viewed 507 times
-
- 15CC01D4-0913-4CB9-A4E6-FA9BDA1D68A5.jpeg (199.66 KiB) Viewed 507 times
-
- 1789ABCA-185E-405C-A68E-7962E2BA383C.jpeg (196.46 KiB) Viewed 507 times
-
- Posts: 29
- Joined: Wed Sep 25, 2019 6:00 am
- Location: Bury, Lancashire, UK
- Been thanked: 1 time
Re: Revit Dominator GTX gloves. Brand New / Unworn Size Large
I have now listed these gloves on EBay and will sell to the highest bidder.
http://rover.ebay.com/rover/1/710-53481 ... olid=11111
http://rover.ebay.com/rover/1/710-53481 ... olid=11111