Bit of an oddity but also very rare to find as a full kit, I got quoted almost £950 from Yamaha for these parts.
My plan was to mount this on a wr450 along with a rally tank and have a very factory looking 450 tenere. But house move means no time for bike builds right now so it's for sale, would also look great on a ttr, wr250 etc. Could even put it on a xt660r and have a lightweight/low seatheight tenere.
This is everything you'd need to mount the tenere fairing, the factory yamaha front frame/tower, light, brackets, side plate, screen, housing etc.
I'm looking for as close to £400 as possible.
Cheers
For Sale: Tenere Face - fairing/light/screen/tower - Yamaha rally fairing
-
- Posts: 1776
- Joined: Thu Apr 14, 2011 8:18 pm
- Location: East Lancs
- Has thanked: 201 times
- Been thanked: 272 times
Re: For Sale: Tenere Face - fairing/light/screen/tower - Yamaha rally fairing
All pictures are there?
***just like Britney Spears oops I did it again……sold the Scrambler & as of now there may not be a replacement***
-
- Posts: 2116
- Joined: Sat Nov 09, 2013 5:36 pm
- Has thanked: 95 times
- Been thanked: 448 times
Re: For Sale: Tenere Face - fairing/light/screen/tower - Yamaha rally fairing
I can see them ok--and just a point on fixing--looks like the frame needs a bracket and two through bolts on the steering head. My WR250R is an aluminium frame and has no bracket--otherwise I would have been interested
Re: For Sale: Tenere Face - fairing/light/screen/tower - Yamaha rally fairing
Pics seem to be working for me?
And yes, you're right - you'd need to either weld or bolt an adapter onto most dirtbikes (I have a machined adapter which could be included if needed). On stuff like an old model tenere/xt660r there may be enough framework already in place to mount without much modification.
And yes, you're right - you'd need to either weld or bolt an adapter onto most dirtbikes (I have a machined adapter which could be included if needed). On stuff like an old model tenere/xt660r there may be enough framework already in place to mount without much modification.