Adventure Bike Rider Forum

Can you help?

I have been searching, without success to find a UK supplier for the front suspension upgrades.

I'm looking at 2 options at the moment:

1) Race Tech spring kit from the USA
2) Ohlins FSK 123. These are available on the UK Ebay but from the USA or Italy.

Do you know of any UK supplier?

Cheers Andy

Ohlins FSK or FKS?
https://www.kais-ohlins.co.uk/suspensio ... t_id=21127

Billy Bananahead wrote: ↑Sun Jan 03, 2021 6:24 pm Ohlins FSK or FKS?
https://www.kais-ohlins.co.uk/suspensio ... t_id=21127

Hi Billy,
It was FSK123. Thanks for the link

minkyhead wrote: ↑Sun Jan 03, 2021 7:03 pm https://www.ebay.co.uk/itm/184236633612

Thanks Minkyhead,
They are far cheaper than the Ohlins. Do you have these fitted?

the hyperpro is a single spring replacement in the right fork leg ......racteck adds a spring and spacer to the left ..ohlins ??? not sure ..tbo looking at the [rice of the ohlins id be tempted to get some 2nd hand 450x fprks and a bearing kit from all balls

Hi, if your interested i have a complete front end from a CRF250x for sale it s both triple clamps forks with new seals and oil front wheel disc and axle, im not sure whether ive got a caliper as well, i used it on my XR400, it should be a lot better than standard 250L forks.
If its any good to you get in touch.

minkyhead wrote: ↑Sun Jan 03, 2021 9:48 pm the hyperpro is a single spring replacement in the right fork leg ......racteck adds a spring and spacer to the left ..ohlins ??? not sure ..tbo looking at the [rice of the ohlins id be tempted to get some 2nd hand 450x fprks and a bearing kit from all balls

Thank you, I have found UK suppliers for both the kits above now.
I could not find any prices on a set of 450x forks but I would have thought they would need a service etc so the price would be more than the Ohlins setup at £235.

You are right about the Race Tech setup, it has another linear spring in the lefthand fork leg. For £110 I'll go this way.

Thanks for your help,

Andy

scooby wrote: ↑Tue Jan 05, 2021 10:57 am Hi, if your interested i have a complete front end from a CRF250x for sale it s both triple clamps forks with new seals and oil front wheel disc and axle, im not sure whether ive got a caliper as well, i used it on my XR400, it should be a lot better than standard 250L forks.
If its any good to you get in touch.

Thank you for the offer. Can you message me with the price please.

Cheers Andy

PM sent