The next step....

The Things We Ride
User avatar
Scott_rider
Posts: 2436
Joined: Wed Mar 21, 2012 12:47 pm
Has thanked: 29 times
Been thanked: 294 times

Re: The next step....

Post by Scott_rider »

Is anyone using a rear wheel hub drive conversion (as opposed to mid-drive) ? If so, what's the verdict?
Suzuki GSX-S1000F...the KTM 450 EXC-R has gone
User avatar
Bojer
Posts: 116
Joined: Mon Feb 01, 2016 8:59 pm
Has thanked: 69 times
Been thanked: 23 times

Re: The next step....

Post by Bojer »

I had the Gtech Escent rear hub drive and it went well especially on the road and of course was not concerned if you tried to pull away in too high a gear . But off road I found it hard work keeping up with mid drive bikes - especially up hills . I have got a Giant Strance now but its a heavy beast by comparison .

I've ridden with a couple of rear hub converted bikes and even the 1000W one struggled/failed to get up off road hills the mid drive bikes managed ok .

If you're riding on your own , without steep hills or with "manual" bikes a hub drive seems ok to me and must give the chain an easier time but a mid drive bike is better/more fun - whether is is as much better as the extra cost is another question !
User avatar
andrew882
Posts: 152
Joined: Tue Mar 28, 2017 12:27 pm
Has thanked: 56 times
Been thanked: 49 times

Re: The next step....

Post by andrew882 »

I converted an old Marin FRS with a hub drive, I would concur with what Bojer said - it was great for smoothing out gentle climbs, but the power delivery felt a bit like a light switch, so not so great for delicate control (although I think this was as much to do with the kit using a pedal sensor rather than torque sensor). I rode a Cube with the Bosch system very briefly on road and it definitely seemed more 'cycle-like' to me.

With it being designed to have the e-system integrated made a big difference too, it just seemed more polished. The downside is that polish costs (and if you're looking for full suspension, it costs a lot!)

I'm currently going round in a loop in my head on whether to stick with what I have, buy a mid-drive kit with torque sensing, or bit the bullet and pony up for a shiny new proper e-bike
garyboy
Posts: 4441
Joined: Thu Mar 07, 2013 6:14 pm
Has thanked: 2278 times
Been thanked: 992 times

Re: The next step....

Post by garyboy »

Well .. I have found that a oem proper Emtb is a completely different thing to an E converted mtb .. more robust, handles better, better wheels and tyres, better balanced, more suited brakes.

..and there's some good but cheap ones about now.
User avatar
Bojer
Posts: 116
Joined: Mon Feb 01, 2016 8:59 pm
Has thanked: 69 times
Been thanked: 23 times

Re: The next step....

Post by Bojer »

andrew882 wrote: Thu Nov 28, 2019 1:00 pm
With it being designed to have the e-system integrated made a big difference too, it just seemed more polished. The downside is that polish costs (and if you're looking for full suspension, it costs a lot!)

I'm currently going round in a loop in my head on whether to stick with what I have, buy a mid-drive kit with torque sensing, or bit the bullet and pony up for a shiny new proper e-bike
I struggled with the same thing for a while , the G Tech was my "toe in the water" until I forced my wallet open to buy the Giant . Physchologically it was hard paying that much for "a mere pushbike" but I have really enjoyed getting out on it with a few current motorcyclists , "its like trail riding but can start from your door" was one of their comments . As Andrew said going from speed sensing to torque sensing makes getting through narrow gateways etc much less fraught !
User avatar
Scott_rider
Posts: 2436
Joined: Wed Mar 21, 2012 12:47 pm
Has thanked: 29 times
Been thanked: 294 times

Re: The next step....

Post by Scott_rider »

I've been contemplating getting a rear drive hub for my Scott mtb ( :roll: ) as it's got a good spec with Deore LX components and a Rockshox judy fork...but it is old. I can get that done for about £750. Or, I've been looking at a new Specialised Levo with a mid drive. They are available new, but old stock, for £1400. However they run Acera components which is a step down from Deore...but I'm not sure that's really an issue and maybe just snobbery in my mind :?. Both are hardtails, which is good enough for what I do.
Suzuki GSX-S1000F...the KTM 450 EXC-R has gone
garyboy
Posts: 4441
Joined: Thu Mar 07, 2013 6:14 pm
Has thanked: 2278 times
Been thanked: 992 times

Re: The next step....

Post by garyboy »

what do people think of the sur ron ebikes .. throttle [ not pedal assist ] ..




their website ..
https://surron.co.uk/collections/surron-lbx
vRSG60
Posts: 1773
Joined: Mon Jul 28, 2014 5:32 pm
Location: Barrowford, Lancastershire.
Has thanked: 67 times
Been thanked: 84 times

The next step....

Post by vRSG60 »

With the Bosch motors you can get an app for around £5 that allows you to modify each of the 4 power modes to your own taste.
I’ve not tried it yet. One reason being that I don’t know what the original settings are for the original modes, so I wouldn’t know how to tweak it.
Something like this I think.

Image

For all things on an electric mountain bike subscribe to the EMBN on YouTube it’s a very well presented channel with lots of information.


Sent from my iPhone using Tapatalk
Out On The Floor - Keep The Faith
scoobydidler
Posts: 917
Joined: Sat Aug 17, 2013 7:02 am
Been thanked: 54 times

Re: The next step....

Post by scoobydidler »

Plus one for EMBN. I've got the e bike bug. I'm having a spell without a trail bike but i still need something to get out on and have some "man time"

As previously mentioned it doesn't half open up a lot of countryside that's not accessible (legally) on a trailbike.
Photo isn't playing ball.

Sent from my H8416 using Tapatalk

crofty
Posts: 751
Joined: Fri Aug 16, 2013 7:14 am
Location: Fife
Has thanked: 205 times
Been thanked: 156 times

Re: The next step....

Post by crofty »

garyboy wrote: Tue Dec 17, 2019 5:32 pm what do people think of the sur ron ebikes .. throttle [ not pedal assist ] ..



If you are considering the Sur Ron in the context of biking trails that E bikes can go on its a non starter, too much like a motorbike.

If you are thinking about it for trails that you can take a motorcycle on then you would have to register it or van it to the trails, more hassle. so not for me.

I am in a house share every winter in Aviemore and ride the trails there alot on my Carrera mtb with a 36v 350w Bafang Hi Torq hub motor set up and it is fine for undulating stuff and a range of 35 miles which covers all the trails lengthwise.
One of the other guys in the house has a Bafang BBS 750w 48v crank drive lashed on to a hardtail mountain bike and that will climb anything, The extra kick a 48v gives over a 36v is considerable so thats the Next Step for me. Probably with a custom built 52v 17Ah battery.
The house in Aviemore is very close to the trails so riding on public roads is kept to a minimum because as you probably know the legal limit is 250w
Post Reply

Return to “BIKES”