Adventure Bike Rider Forum

Okay I've been busy adding yss pd valves to the xt660z and we'll I need x2 alloy spacers to go on top of damper rod and the yss valve..

Outer diameter is 36mm inner diameter 30mm so would think 4 to 5 mm thickness

The height of each circular ring spacer is 10mm..
https://www.squaredeals-ltd.co.uk/yss-p ... 1770-p.asp

Something like in the link above... So any engineers on here?... Pm me a price for say 5 sets so as to make it worth while.. Etc..

Could be 35mm outer diameter as I can find alloy tubing but have no chop saw lol...

Cheers..
This is the top of the xt660z damper valve

I've got a very nice Myford Super 7 lathe you are free to use Russ if you know how to operate one ? I'm still struggling with the handbook.

Outer diameter is 36mm inner diameter 30mm so would think 4 to 5 mm thickness

Try 3mm

soho wrote: ↑Sun Dec 06, 2020 11:22 am I've got a very nice Myford Super 7 lathe you are free to use Russ if you know how to operate one ? I'm still struggling with the handbook.

Last time I used a lathe was at school well a milling machine and buggered that right up... Thanks for the offer...

Greetings,

How about using a hub ball bearing? You could try my local friendly bearing specialist;

https://www.emmett-enterprises.com/inde ... page=index

Another contact might be Moorside Manufacturing at Haughton Green; 0161 335 0235

TTFN

Hugh.

Thanks to a certain hampshireit folk aka ksithumper looks like I'm now sorted...

Top job...