Bonnet bend went better than expected around an old table first time right so really pleased with that.
Next the Wings come in four sections, and its the last one than is arse clenching.
Covid constructing
-
- Posts: 519
- Joined: Thu Sep 15, 2016 11:43 am
- Location: Portishead
- Has thanked: 21 times
- Been thanked: 131 times
Re: Covid constructing
- Attachments
-
- F205F382-C245-4CAC-AACB-19CA9FEB1055.jpeg (181.11 KiB) Viewed 2738 times
-
- BA035AA7-293E-4A22-AA7B-A0CF0A2F0A87.jpeg (126.77 KiB) Viewed 2738 times
-
- 90CABA83-9C90-4035-B89D-A1A493467859.jpeg (144.63 KiB) Viewed 2738 times
-
- Posts: 3519
- Joined: Tue May 09, 2017 9:03 pm
- Has thanked: 1414 times
- Been thanked: 1669 times
Re: Covid constructing
Nothing as skilled or exciting for me...but a 5-bay polytunnel is taking shape in the back of the veg garden.
-
- Posts: 519
- Joined: Thu Sep 15, 2016 11:43 am
- Location: Portishead
- Has thanked: 21 times
- Been thanked: 131 times
Re: Covid constructing
Ha ha a poly tunnel, try doing it today as blowing a hooley in Bristol!
Did you get it in shape?
The outside tape line is the cut line and the inner will be folded at 90 degrees down to bolt on to the outer wing.
I spent hours deliberating whether it was right or whatever as too short will write the wings off
Did you get it in shape?
The outside tape line is the cut line and the inner will be folded at 90 degrees down to bolt on to the outer wing.
I spent hours deliberating whether it was right or whatever as too short will write the wings off
- Attachments
-
- 34F2B590-805D-4AA2-8C88-8F4516D87EE4.jpeg (143.19 KiB) Viewed 2678 times
-
- 98AE6E84-5F14-468E-9059-7FA9718C00F3.jpeg (118.43 KiB) Viewed 2679 times
-
- E7A8B98F-7970-469E-91DE-A8BDD3AEC45C.jpeg (88 KiB) Viewed 2679 times
-
- Posts: 519
- Joined: Thu Sep 15, 2016 11:43 am
- Location: Portishead
- Has thanked: 21 times
- Been thanked: 131 times
Re: Covid constructing
The cut went well stoopidly enough i had to sink a few beers Yesterday eve to do it.
Annoying part was the wing riv nuts were exactly lined up with dash bracket so had to raise both wings by a few mm, typical
All good so far
Annoying part was the wing riv nuts were exactly lined up with dash bracket so had to raise both wings by a few mm, typical
All good so far
- Attachments
-
- 8F0DE50E-2CBA-482F-95A1-D5277A461BEF.jpeg (137.79 KiB) Viewed 2672 times
-
- 3E010767-E709-417F-9584-4CCCEAA93BAA.jpeg (172.95 KiB) Viewed 2672 times
-
- 1D5A0894-AA00-4471-A4DE-70D598D38F36.jpeg (147.33 KiB) Viewed 2672 times
-
- Posts: 3519
- Joined: Tue May 09, 2017 9:03 pm
- Has thanked: 1414 times
- Been thanked: 1669 times
Re: Covid constructing
Still doing the frame...it's a big un with 5 hoops on a sloping site, but looking straight so far.Helicoptermanr22 wrote: ↑Mon Apr 13, 2020 9:21 am Ha ha a poly tunnel, try doing it today as blowing a hooley in Bristol!
Did you get it in shape?
The outside tape line is the cut line and the inner will be folded at 90 degrees down to bolt on to the outer wing.
I spent hours deliberating whether it was right or whatever as too short will write the wings off
You are right...a bit breezy to put the cover on today, but we've got the doors to build, which can be done under cover.
-
- Posts: 519
- Joined: Thu Sep 15, 2016 11:43 am
- Location: Portishead
- Has thanked: 21 times
- Been thanked: 131 times
Re: Covid constructing
The graft continues:))
Been werking on the fixtures and fittings like the door handles bonnet hinges and air vent fixtures and tailgate chains
Been werking on the fixtures and fittings like the door handles bonnet hinges and air vent fixtures and tailgate chains
- Attachments
-
- 34228971-2165-4DF1-AC5F-5E848A6E8676.jpeg (125.69 KiB) Viewed 2589 times
-
- 76C63164-B318-44B6-82C0-CCE95BCD593E.jpeg (131.32 KiB) Viewed 2589 times
-
- 15E1F65D-1708-4C72-B28B-6F6C4309D95A.jpeg (108.59 KiB) Viewed 2589 times
-
- Posts: 519
- Joined: Thu Sep 15, 2016 11:43 am
- Location: Portishead
- Has thanked: 21 times
- Been thanked: 131 times
Re: Covid constructing
Pleased so far, last panel is the outer front wings which im struggling with
- Attachments
-
- 09AC76E2-BF3C-48EB-932A-CAECCC82FE96.jpeg (121.85 KiB) Viewed 2588 times
-
- AD186B10-6313-4345-8D3A-455DF83076CC.jpeg (160.43 KiB) Viewed 2588 times