Page 1 of 1
Zig zag hill closed
Posted: Sat May 18, 2019 4:23 pm
by Tramp
Traffic agency update zig zag hill near shaftesbury is closed for 3 weeks for major repairs as its been cut up badly over winter.... Some smooth tarmac would be nice
Re: Zig zag hill closed
Posted: Sat May 18, 2019 5:57 pm
by Godspeed
Thanks, was heading that way tomorrow and onto the drove
Re: Zig zag hill closed
Posted: Sat May 18, 2019 6:35 pm
by zimtim
Just had a check and the B3081
Including Zigzag hill will be closed from Monday the 20/5 until the 31/5 for resurfacing.
So you should be okay tomorrow
Chris
Godspeed wrote: ↑Sat May 18, 2019 5:57 pm
Thanks, was heading that way tomorrow and onto the drove
If is resurfacing hope it's not a squirt and gravel type as that will be really dodgy.
Re: Zig zag hill closed
Posted: Sat May 18, 2019 7:53 pm
by zimtim
Re: Zig zag hill closed
Posted: Sat May 18, 2019 8:19 pm
by Godspeed
Re: Zig zag hill closed
Posted: Sat May 18, 2019 11:16 pm
by SteveR
Tramp wrote: ↑Sat May 18, 2019 4:23 pm
Traffic agency update zig zag hill near shaftesbury is closed for 3 weeks for major repairs as its been cut up badly over winter.... Some smooth tarmac would be nice
"
cut up badly over winter" Ferchrissakes, I came down it for the first time ever last October (known about if for years) when my Lad and I were in Dorset for a few days. It was like a bloody MX track then!!
I shudder to think what it looked like just now!!
Re: Zig zag hill closed
Posted: Sun May 19, 2019 9:38 am
by herman
I must have gotten used to the state of the roads here then. I went down it a couple of weeks ago and thought it was normal service.
Re: Zig zag hill closed
Posted: Sun May 19, 2019 3:58 pm
by Godspeed
Up it today, it wasn’t too bad to be fair
Re: Zig zag hill closed
Posted: Sun May 19, 2019 4:04 pm
by Tramp
Up is always better tgan down as so e of those bends are real tight off camber....great on a supermoto
Re: Zig zag hill closed
Posted: Sun May 19, 2019 7:16 pm
by Trev
Came up it today, same old sh*te surface, well overdue a resurface