Big hello to the N/E here, just relocated to Gateshead for work reasons and quite like the place have to say !! On a cheeky note wanted to ask if any one local (ish) had a bike bench forsale (hydraulic) or can lend one over the winter, I've a major strip down to carry out plus two project bikes to kick into action. I'm getting to that age where floor level working is bad for the bones....!!!!!
Cheers Mez.
NorthEast ABR's
-
- Posts: 715
- Joined: Tue May 10, 2011 8:31 pm
- Has thanked: 13 times
- Been thanked: 110 times
-
- Posts: 715
- Joined: Tue May 10, 2011 8:31 pm
- Has thanked: 13 times
- Been thanked: 110 times
-
- Posts: 715
- Joined: Tue May 10, 2011 8:31 pm
- Has thanked: 13 times
- Been thanked: 110 times
Re: NorthEast ABR's
That's ok bud, what I will require is contacts for powder coating, machining and fabbing, wheel builder, suspension specialists maybe, recommendations always better the googling the situ..!!!
-
- Posts: 268
- Joined: Wed Mar 16, 2011 11:33 am
Re: NorthEast ABR's
Have a wonder up the hill. (westgate road)
Not sure if they are still open but along side the big show rooms
there used to be some old school bike engineers up there.
Not sure if they are still open but along side the big show rooms
there used to be some old school bike engineers up there.
- Boggs
- Posts: 1268
- Joined: Thu Jan 26, 2012 5:37 am
- Location: County Durham
- Has thanked: 108 times
- Been thanked: 102 times
Re: NorthEast ABR's
There's a little known chap in my home town,he worked in all the major dealerships on Westgate road for many years and from which he has accumulated a wealth of knowledge regarding all things two wheeled,he's now gone on his own,highly recommend him...
Mark Raine 07989 630226
VTS (V-Twin Services)
Consett
Mark Raine 07989 630226
VTS (V-Twin Services)
Consett