Today these quite cheap DB Killers were in the Mail. Did anyone install such yet? Propably the whole exhaust system has to come off to reach al rivets that need to be drilled out ??!

my solution is a seat screw that can be opened with a coin anywhere anytime:

it's not the original Kawa-green but close:

...

new paint, liscenseplate between the pipes, diy holder for givi boxes:

The ignitition Key-Switch is poor quality, once in a hurry i pulled out the key inthe middle between On and Off. Had quite some trouble to get the key back in. Now I always make sure to turn to OFF befor pulling on the key, since the whole switch has a little play since then...

Today I had to drain 480 ml of oil. When cold (after the filter change) it was just right but when hot, the level was much too high.
I never had a bike before, which showed such huge level-differences according to the temperature. Must have to do with the dry sump construction, I assume.

Thanx to netsonic for the hint, after getting the bike, I added 0.8L of oil, so it's on the upper end of the dipstick-level when cold. Maybe already too much when hot?! I'll keep you informed after checking. 2 new gaskets are bought already, just in case. The voltage issue is the same on my bike (2 ...

Oh, interesting, i wiggled the valve arms with my fingers an on the "T" they seemed under preassure and on the red marking (foto) they were the loose and had some play, thats where I did the adjustment .. I' m pretty uncertain now?! I ordered parts in Poland, there were these 3 different b...

A short question, I have to choose from 3 breakpads, which perform best ?

1. FA664 organic
2. FA664TT carbon
3. FA664R sintered