Forgot to mention I posted two front sprockets this morning before work and my neighbour is available tomorrow morning to hopefully fingers crossed carry out the last weld I will need to finish my link pipe Fingers crossed next weekend I might have the bike back on the road Hi Ed, front sprocket ar...

Forgot to mention I posted two front sprockets this morning before work and my neighbour is available tomorrow morning to hopefully fingers crossed carry out the last weld I will need to finish my link pipe Fingers crossed next weekend I might have the bike back on the road awesome :mrgreen: :mrgre...

well after a sleepless night thinking I'd buggered up my bike went for a test spin this morning and normal service has resumed :o :mrgreen: Ah if it aint broke don't fix it i here y say :!: Yesterday I put the removed items back, rechecked TPS to .74v, new heatproof gaskets (self cut) behind the cle...

Did have a good look around the Moto-X site, they have lots of parts that quadzilla don't so good find. One interesting point though is that some parts are new and improved, the Romet and later Mash bikes moved away from synerject ecu's due to known issues and went over to Delphi, the ecu listed on ...

Hi both yes both clean air and O2 back as standard. I had virtually eradicated the stalling, maybe by luck but I belive the combination of all the mods listed, fuel cap, iridium spark plug, 98 ron petrol, tappets being spot on, tps fettled, no air leaks on relavent joints seemed to worked...hopefull...

Hi Ed & Ned, having run the bike yesterday it didn't go well, stalled at most junctions/roundabouts and felt like the engine was struggling................ :shock: ......... before i took the clean air system off this never happened since all the work I've done over time .....took the decision t...

So took it for a spin today with the clean air solenoid connected and it ran good with no warning lights. However it appears that while wrestling the old front sprocket off I've damaged the seal behind it as its dripping oil, and has become a very expensive Scottoiler. [emoji849] https://uploads.ta...

IMG_20200629_154605.jpgIMG_20200629_154605.jpg Fitted the 38t sprocket with a new chain today and it looks like it all works with the chain guide but a slow break in ride is needed to know for sure Hi Ed, that's some serious changes away from stock. Interesting rear tyre choice what's the plan for ...

Scotriders wrote: ↑Mon Jun 29, 2020 6:45 pm The 3K9 ohm resistor has Orange, White, Red and Gold strips.

Sent from my FIG-LX1 using Tapatalk

Great thanks

From the reading I'm getting on my meter the clean air solenoid has a resistance about 4000ohm so I've ordered 10 x 3K9ohm which should do the trick. If they work I'll post out a couple to those that want them. Sent from my FIG-LX1 using Tapatalk I was running the bike with just the clean air solen...